Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
INPUT VHF-UHF [1]
In any position of the menus INPUT U/V 1, INPUT U/V 2, INPUT U3 or INPUT
U 4 press the keys ▲▼ at the same time to go back to main menu.
OUTPUT VOLTAGE
INPUT GAIN
Adjustable from 0 to 20 dB
With input power from 75 dBμV, so as not to degrade the channels, reduce
the gain of the preamplifier. Typical values of gain adjustment:
Position the function selector
to go back to the main menu.
To set the INPUT V/U 1 parameters press
menu.
Available channels, CCIR table:
BIII E5..E13 – DAB
UHF 21..48 with LTE700 5G filter
UHF 21..60 with LTE800 4G filter
UHF 21..69 without LTE filter
On request M channel table.
The input can be configured as BIII/DAB or UHF. Once a
filter is selected in BIII/DAB or UHF, the rest of the filters
must be from the same band.
The LTE filter is preset to 5G LTE700. It can be changed in
the ADVANCED menu.
Press
▲▼
to select ON or OFF to enable the remote power
supply on this input. Press
The remote power supply is set on 24V. It can be changed
to 12V in the ADVANCED menu.
Position the function selector
start the pointer
output level through the keys
•
Power up to 70 dBμV adjust the gain to 20 dB
•
Power 80 dBμV adjust the gain to 10 dB
•
Power 90 dBμV adjust the gain to 0 dB
- 17 -
to start the pointer
to scroll options then press
to confirm.
to scroll options, select the desired
▲▼
on INPUT FM/BI and press
to enter the
on GAIN and press
and press
to confirm.
to
Publicidad
Tabla de contenido
