Preparation; Assembly Instructions - HAMPTON BAY WDF9-2 Guía De Uso Y Cuidado

Preparation

Before beginning assembly of product, make sure all parts are present. Compare parts
with package contents list. If any part is missing or damaged, do not attempt to
assemble the product.
Estimated Assembly Time: 5-10 minutes
No Tools Required for Assembly.

Assembly Instructions

1. This window fan has been designed to
fit double-hung, slider ad casement
windows with minimum openings of
24.4 in. wide and 13 in. high. ( Fig. 1 ).
No feet required when using in the
window. This fan is designed and
recommended for use with your window
screen in place.
2. This fan can also be used on the floor.
Push the feet (F) into the fan body (A)
and snap together. (Fig. 2)
FOR DOUBLE-HUNG TYPE WINDOWS ( Fig. 3 )
1. With the window fully open, set the fan in
the window with front (A) of fan facing the
INSIDE.
2. Hold fan with one hand while adjusting panels
(G) with the other.
3. Close the window on top of the fan with the
bottom edge of the window behind the lip of
fan housing.
4. If the fan still does not fit properly in the window, readjust the expandable panel on
right/left side of fan to fill in remaining space between panel and window frame
until a secure fit is achieved.
12.3 in.
Pulls out up to 5.5 in.
G
7
Please contact 1-855-HD-HAMPTON for further assistance.
23.8 in.
Fig. 1
A
Fig. 2
F
A
Fig. 3
HAMPTONBAY.COM