Unpacking Instructions - Fanimation SPITFIRE MA6721-220 Serie Manual Del Usuario

Ocultar thumbs

Tabla de contenido

Idiomas disponibles

This manual is designed to make it as easy as possible for you

to assemble, install, operate, and maintain your ceiling fan

Tools Needed for Assembly

blade screwdriver

WARNING

Before assembling your ceiling fan, refer to section on

proper method of wiring your fan (page 6). If you feel you

do not have enough wiring knowledge or experience,

have your fan installed by a licensed electrician.

For your convenience, check-off each step. As each step is completed, place a check mark. This will ensure that all

steps have been completed and will be helpful in finding your place should you be interrupted.

WARNING

Do not install or use fan if any part is damaged or

missing. This product is designed to use only those

parts supplied with this product and/or any accessories

designated specifically for use with this product by

Fanimation. Substitution of parts or accessories not

designated for use with this product by Fanimation could

result in personal injury or property damage. Contact

your retail store for missing or damaged parts.

1. Check to see that you have received the following

parts:

NOTE: If you are uncertain of part description, refer to

exploded view illustration.

Motor Assembly

Wiring outlet box and box connectors must be of type

required by local code. The minimum wire would be a 3-

conductor (2-wire with ground) of the following size:

NOTE: Place the parts from the loose parts bags in a small

container to keep them from being lost. If any parts are missing,

contact your local retailer.