Installation Diagram; Outdoor Unit; Installation Of The Indoor Unit - McQuay D Serie Manual De Instalación

Indoor unit
Air Intake
Air Discharge Nozzle
Mounting
Ensure that the overhead supports are strong enough to hold the
unit's weight. Position hanger rods and check for alignment with
the unit. Check that hangers are secure and that the base of fan-coil
unit is level in the two horizontal directions, taking into account
the gradient recommended for drainage flow as shown.
Check the gradient recommended for drainage flow as follow.
500mm
for free return of air

INSTALLATION DIAGRAM

INSTALLATION OF THE INDOOR UNIT

50mm
300mm
500mm
300mm
Air Intake
Provide clearance for servicing and optimal air flow as shown in
the diagram.
The indoor unit must be installed such that there is no short circuit
of cool discharge with air discharge.
Respect the installation clearance.
Do not put the indoor unit where there is direct sunlight on unit.
The location is suitable for piping and drainage and it must be have
a large distance between a door and unit.
CC 30 ~ 100D / DR
800.0
1-3
Refrigerant Piping

Outdoor unit

800.0
All dimensions in mm.