SWITCHING OFF
PROLONGED SWITCHING OFF
If the boiler should remain inactive at length close the gas cock and cut electrical power supply to the appliance.
TEMPORARY SWITCHING ON/OFF
Proceed in one of the following ways:
● use the room thermostat;
● use the adjustment potentiometers (on the instrument panel);
NOTE: with a new boiler or after a long period of
inactivity, one can check for the locking of
the circulating pump. In this case it is
necessary to unscrew the front stopper and
make the motor shaft rotate with a
screwdriver.
MAINTENANCE
To ensure long-lasting product functionality and efficiency within the limits prescribed by the laws and stand-
ards in force, the unit must undergo regular maintenance.
Frequency of inspection depends on the specific conditions of installation and use but it is advisable to have the
unit checked once a year by authorised Lamborghini Service personnel. Only properly qualified personnel
with specific knowledge in the field of safety, efficiency, environmental hygiene and combustion may carry out
work on the unit. To ensure proper maintenance it is also required that such personnel be fully updated on the
constructive and functional characteristics of the boiler.
Should work or maintenance be carried out on any structures situated near fume ducts and/or fume discharge
devices and their accessories always switch off the boiler and, when work is over, have its efficiency checked
by qualified personnel
IMPORTANT: before doing any cleaning or maintenance work on the unit switch off the electrical power supply
via the switch on the boiler itself. Shut off the gas supply by closing the tap on the boiler. The above stated,
work generally involves the following:
51