Homewerks 7148-01-AX Manual Del Usuario página 7

INSTALLATION INSTRUCTIONS (Continued)
5. The tabs (5.1) will help hold the fan housing (A) in place in the
ceiling opening while installing the suspension brackets.
6. Insert suspension bracket (C) into the rails on the fan
housing (A) on the side with the duct opening. Insert
suspension bracket (D) into the rails on the opposite side of
the fan housing (A) and then slide suspension bracket (E)
into suspension bracket (D).
7. Insert the fan housing (A) into the opening in the ceiling.
8. Position the fan housing (A) so the bottom edge of the fan
housing (A) is flush with the ceiling board. Do not the flush
mount the fan housing (A) to the joist.
Attach the end of each of the suspension brackets (C, D, E)
to the ceiling joists using wood screws (AA).
9. Secure the suspension brackets (C, D, E) to the fan housing (A)
using machine screws (BB).
Homewerks.com
5
6
C
E
7
Room-side new construction installation
8
AA
D
9
D
BB
7
A
5.1
A
Attic-side existing construction installation
A
A
E
AA
A
BB
E
D
A
AA
C
C