Brandson 304287 Manual Del Usuario página 18

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Area measurement
Press the "Mode" button briefly (
measurement symbol (
The symbol of the side to be measured flashes on the display. Now aim at the
desired point and press the "ON/OFF" button (
the first side. The square symbol of the second side then starts flashing. Measure
the second point as described above. The device automatically calculates the area
and shows the result on the display. The measurement results of the lengths of
the first and second sides are displayed in the auxiliary display area.
Volume measurement
Press the "Mode" button briefly (
measurement symbol (
The symbol of the side to be measured flashes on the display. Now aim at the
desired point and press the "ON/DIST" button to measure the length of the first
side. The symbol of the second side then starts flashing. Measure the second
point as described above. The device automatically calculates the area and shows
the result on the display. The measurement results of the lengths of the first and
second sides are displayed in the auxiliary display area.
Special functions (Pythagoras)
This mode is meant for the automatic calculation of the Pythagorean theorem.
There are three different Pythagorean measurements. Select the desired meas-
urement and then carry out the measurement.
Please press the "Mode" button briefly (
desired Pythagoras function ("
symbol of the side to be measured flashes on the display. Now aim at the desired
point and press the "ON/DIST" button to measure the length of the first side. The
symbol of the second side then starts flashing.
18
) in the switched-on state until the area
) appears in the display.
) in the switched-on state until the volume
) appears in the display.
) in the switched-on state until the
", "
", "
") appears in the display. The
) to measure the length of
English

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

20200108nb131

Tabla de contenido