Technical Parameters - Mestra 100512 Manual De Instrucciones

Ocultar thumbs

Contenido

página de 14

/ 14
Contenido
Tabla de contenido
Marcadores

Tabla de contenido

Idiomas disponibles

FAQ

If the machine can't work properly, please kindly check

as below before you send it out for repair.

Problem

Checking

methods

Do not work

Please check if the

plug is

disconnected from

the socket.

Please check if the

filter cover is

installed

completely

Odor cannot

Is there a very

be removed

strong odor in the

using

environment?

(Notes: air should

be purified

continuously)

Does the using life

time for activated

carbon filter come

to the end?

High noise

Is the PE bag for

filter removed?

Does the using life

time for HEPA

come to the end?

Air quality

Is the air humidity

indicator

very high?

doesn't

Is the machine

work

affected by fume

properly

or sprays?

Small

Is the machine

changes for

using area too big?

humidity or

temperature

data

If the problem still existed after above inspections, please

disconnect the power and send it for repair.

Solution

Power plug

should be

plugged properly

Recover the

filter cover

correctly

Suggesting to

ventilate, then

start up the

machine.

Please replace

new filters.

Please take out

filters and tear

off PE bag.

Please replace

new HEPA.

Please move the

machine to

another

room to test

again.

Please use this

machine in

applicable room.

Maintenance and cleaning

instruction

Please remove plug from the socket before cleaning and

maintenance.

 Cleaning the body for this device by damp cloth, then

wipe it dry.

 If machine is too dirty, neutral detergent can be used

for cleaning, but please dilute the detergent before use.

 Do not clean the unit with solvent.