Metrohm 799 GPT Instrucciones Para El Uso página 171

799 GPT Titrino
Calibration data can be entered. They are accepted with &Info.CalibrationData
$G. If calibration data are entered, the calibration date is deleted.
3.2.2.132. Info.PrepData.D0.Date
Info.PrepData.D0.Time
Info.PrepData.D1.Type
Info.PrepData.D1.Date
Info.PrepData.D1.Time
identical to .D2
Data from the last correctly executed preparation.
3.2.2.133. Info.Checksums
Info.Checksums.MPList
Info.Checksums.ActualMethod
The checksums can be used to identify the content of a file unequivocally,
e.g. files with identical content
have identical results of the checksums. An empty file has checksum "0". The
calculation of the checksums is triggered with $G.
.MPList: Result of the checksum of the current measuring point list.
.ActualMethod: Result of the checksum of the current method in the working
memory. Identical methods with different method names have the
same results of the checksum.
3.2.2.134. Info.DetermData
Info.DetermData.Write
Info.DetermData.MPList.1.Attribute
Info.DetermData.ExV
Info.DetermData.MPList.1.X
Info.DetermData.MPList.1.Y
Info.DetermData.MPList.1.Z1
Info.DetermData.MPList.1.Z2
for every measuring point
Determination data in hexadecimal format. A measuring point list is available
in mode DET, MET, STAT, DOS, DOC, SET, KFT, and MEAS.
Recalculation of the measuring data is triggered with $G.
.Write: With "ON", the following nodes can be overwritten:
&Info.DetermData.MP.List, &Info.TitrResults.Var.C4X (X = 0...5),
&Info.TitrResults.TempVar.C7X (X = 0...9), and &Mode.Name.
.ExV: Volume of the exchange unit, with which the determination was
executed
.MPList.1.Attribute: Attribute
.MPList.X: X coordinate, time
.MPList.Y: Y coordinate, volume
.MPList.Z1: Z1 coordinate, measuring value
.MPList.Z2: Z2 coordinate, temperature
3.2.2.135. Info.TitrResults.RS.1.Value
etc., up to .9
Info.TitrResults.EP.1.V
3.2 Remote control commands
read only/read+write
read only/read+write
read only/read+write
read only/read+write
read only/read+write
read only/read+write
read only
read only
read only
read only
read only
$G
read only
read only
$G
ON, OFF
read only
read only
167