Lukas LX-Strut Instrucciones De Uso página 13

When working with the device or its components, make sure that you
do not get caught in the webbing or trip during transport.
Before transporting the device, always check that it is placed in such a way
that accidents are avoided.
After attaching the struts, it must be ensured that no movement can be
generated by pressing and vibrating on the vehicle. The vehicle must always
be standing securely during rescue and training work.
Ensure adequate lighting when working.
Always keep these operating instructions handy at the place of use in
the proximity of the device.
The manufacturer reserves the right to change the design of the LX-Strut
stabilisation system to make sure it is always up to date with the latest
technical developments and requirements.
The LX-Strut stabilisation system is designed exclusively for the use with
BOS.
In addition to the safety instructions in these operating instructions, all generally applica-
ble, statutory and other binding national and international accident prevention regula-
tions must be observed and referred to!
WARNING / CAUTION / ATTENTION!
The device is intended exclusively for the purpose described in the operating instruc-
tions (see chapter "Intended use"). Any other use or use beyond the specifications is
considered to be improper use. The manufacturer/supplier is not liable for any damages
caused as a result. The risk is borne solely by the user. Proper use also includes follo-
wing the operating instructions and compliance with the inspection and
maintenance conditions.
LUKAS Operating Instructions LX-Strut LUKAS Operating Instructions LX-Strut
24 25