Lukas LX-Strut Instrucciones De Uso página 18

WARNING / BEWARE!
The LX-Strut should not come into contact with acids or alkaline
substances
The light grey plastic components of the LX Strut are, dependent on the con
ditions, resistant to
Gameic acid / chlorine / chloroacetic acid / chromosulphuric acid / acetic acid
/ fluorine / hydrofluoric acid / tincture of iodine, alcoholic /
potassium permanganate / kingwasser / cresol / oleum / resorcinol /
nitric acid <65% / hydrochloric acid 37% / sulphuric acid 50% /
Thionyl chloride / / trifluoroacetic acid <99% / hydrogen peroxide 30% /
Sulphuric acid
For safety reasons, the plastic components must be replaced after
contamination and disposed of properly.
LUKAS Operating Instructions LX-Strut
6. Operation
6.1 Structure
1. Bring the stabilisation system into position - adjust the height.
2. Hook the webbing (hook) into the existing opening on the vehicle.
3. Slightly tighten the strap with a ratchet.
4. Slide the edge protector supplied into the area of the exhaust.
6.2 Extensions
1. Loosen the strap with the ratchet
2. Guide the belt during automatic rewinding
3. Pull the locking bolt and retract the telescopic rod
4. Check the unit for accident-proof housing.
LUKAS Operating Instructions LX-Strut
34 35