Belkin AirCast Auto Manual Del Usuario página 7

Ocultar thumbs Ver también para AirCast Auto:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

InITIAl seTUp
sections
table of contents
pair your phone:
1.
Press and hold the button until the light ring starts flashing . The
button light will briefly turn off before it starts flashing . Do not
release the button until it starts flashing .
2.
On your phone, go to the Bluetooth settings menu .
3.
Make sure Bluetooth is turned on .
4.
On some phones, set your Bluetooth to search for
new connections .
5.
Select the AirCast Auto from the list of accessories .
6.
If asked for a pass code, type in "0000" .
7.
When paired successfully, the light ring will turn solid blue .
8.
Some phones may ask if you want to connect . Select "Yes" .
pairing with a different phone:
Only one phone can be paired to the AirCast Auto at any one time . To
pair a different phone:
1.
Put the AirCast Auto into sleep mode by pressing and holding
the button until the light ring turns off, and then immediately let
go of the button .
2.
Repeat the pairing instructions listed previously .
AirCast Auto
1
2
5
3
4
5
6
7

Publicidad

Tabla de contenido
loading

Tabla de contenido