Cordless Blower · 20v Lithium-ion Battery
Operation
Switch ON and OFF (Fig. 5 & 6)
WARNING! Always use proper eye protection that conforms to ANSI Z87.1 (CAN/CSA Z94.3 )
standards while operating this machine.
- Select high or low speed with the speed switch
position, speed 2 – high speed.
- Switch the blower ON by squeezing the trigger switch
- The trigger switch is dual function: When the trigger switch is depressed slightly the blower
will turn on, giving the operator control when blowing delicate areas, etc., turn OFF by
will click into the constant "ON" position and remain on when the switch is released – allowing
switch.
-With the unit ON, hold the blower with one hand (Fig. 6) and blow from side to side with the
nozzle several inches above the ground, slowly advance keeping the accumulated pile of debris
in front of you.
- To switch the blower OFF, squeeze the trigger switch again and release.
B
AFTER SALES SUPPORT
1855 399 9415
Fig.5
A
: front pos i tion, speed 1 – low speed; back
.
Operation
Fig.6
10