Wifi Connection - NuWave OxyPure Manual Del Propietário

Ocultar thumbs Ver también para OxyPure:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

WIFI CONNECTION

The OxyPure is equipped with Wi-Fi to operate the unit
from any location. To set up and activate the Wi-Fi:
Download the NuWave Connect app via the Apple Store
1.
or Google Play on your smartphone or device and open
the app.
Make sure your phone is connected to your network.
2.
Open the app and follow the instructions for the
verification process. Once verification is complete,
begin adding devices. To add a device tap "+" then
select "OxyPure."
Next, plug the OxyPure into a compatible power outlet.
3.
To activate Wi-Fi Pairing Mode, press and hold the power
button on the OxyPure for 2 seconds until the light next
WIFI begins to rapidly blink at a rate of about 2 blinks per
second. Once the Wi-Fi light is rapidly blinking, in the app,
tap the Finish Network Configuration button on the bottom
of the Add Device page.
Next, you will be prompted to either connect to your network
4.
or confirm your existing network password.
Note: To either connect to or change networks, depending on
your phone, you may be removed from the app to complete the
network connection. Return back to the NuWave Connect app
and continue with the setup process.
When the OxyPure is connected to the Wi-Fi, the light
5.
next to "WIFI" will stop flashing and stay continuously lit.
If the OxyPure did not connect to your network, the
WIFI light will turn off. Follow steps 3-4. Make sure
to select the proper Wi-Fi network and type the
correct password.
nuwavenow.com
nuwavenow.com
11
11

Publicidad

Tabla de contenido
loading

Tabla de contenido