Cleaning & Maintenance - NuWave OxyPure Manual Del Propietário

CLEANING & MAINTENANCE
Your OxyPure can easily be moved from one location to
another. Just hold the OxyPure by the handles on each
side and roll the unit to the chosen location. The wheels
underneath provide extra maneuverability and mobility
whenever it's needed.
Before First Use
Wipe Top Vent and In Flow Vent with a slightly damp cloth or
paper towel. Dry thoroughly before use.
After Use
Your OxyPure should be cleaned periodically and after
excessive use to ensure proper performance and function.
To clean the outsides of the OxyPure, use a cloth or paper
towel to remove dust and other particles. For tougher
buildup, use a damp cloth or paper towel and dry thoroughly.
Cleaning the Top Vent and In Flow Vent
Use a soft brush to remove dust and debris.
1.
If needed, use a slightly wet paper towel or damp
2.
cloth to remove larger buildup. Do not use any harsh
abrasives or cleaning pads on Top Vent or any part of
the unit.
Cleaning the Odor Sensor Opening
The Odor Sensor is located on the side
corner of the OxyPure toward the top,
under the small grill opening.
Keep Odor Sensor clear of dust and
•
debris using a soft cloth to maintain
accurate odor readings.
DO NOT tamper with Odor Sensor or
•
opening over Sensor. Do not spray inside or near small grill
opening over the Odor Sensor. Doing so may cause the
Sensor to malfunction and can void your warranty.
16 16
cleaning & maintenance
Odor Sensor