NuWave OxyPure Manual Del Propietário página 17

DO NOT drop any dust or residue into
the OxyPure when cleaning.
The order of the filters inside the
OxyPure is as follows (bottom to top):
1. Stainless Steel Pre-Filter
(washable)
2. Bio-Guard Filter (washable)
™
3. Ozone Emission Removal Filter
(not washable)
4. HEPA/Activated Carbon Combo
Filter (not washable)
• The OxyPure should be placed
on the floor when assembling
the filters.
The CLEAN FILTER 2 indicator will turn blue after 3 to
6 months, indicating the filter should be cleaned for
optimal results (Bio-Guard
indicator will turn red after 6 months of use, indicating
the filter needs to be cleaned.
The REPLACE FILTER 4 indicator will turn red when the
filter (HEPA/Activated Carbon Combo Filter) needs to be
replaced. The filter will last up to 1 year depending on
how often the unit is running in its environment.
Changing the Filters
The filters inside the filter slot need to be changed or
cleaned on schedule to help your OxyPure maintain
optimum, efficient performance.
Remove Filter Slot Cover in back rear of the OxyPure
1.
using its built-in handle.
Slide out filters that need cleaning or replacing.
2.
Allow washable filters to dry completely before you
3.
reinstall into the unit.
Never place a wet filter into the OxyPure.
•
Filter Slot Cover must be secure or unit will not work.
•
CAUTION
2
1
Filter). The CLEAN FILTER 2
™
nuwavenow.com nuwavenow.com
4
3
17 17