NuWave OxyPure Manual Del Propietário página 20

Ocultar thumbs Ver también para OxyPure:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

CLEANING & MAINTENANCE
Cleaning Underneath Top Vent
The Top Vent of your OxyPure can be removed to clean
the surface underneath the Top Vent and the inner
vent screen.
To clean the surface underneath and inner vent screen:
Turn the OxyPure off and unplug the unit.
1.
Lift the Top Vent using the built-in tab.
2.
Using a dry or slightly wet paper towel, wipe up any dust or
3.
accumulated particles off surface and inner vent screen.
To clean the inner wall opposite of the fan or to remove
an object that has fallen through
the inner vent:
After removing Top Vent, locate
1.
the two screws closest to the end
on the inner vent near the grill
opening, underneath the main Top
Vent. DO NOT unscrew the four
outer screws.
Use a Phillips screwdriver to
2.
loosen the two screws (only).
Lift up inner vent.
3.
Only a portion of the inner vent
will lift up.
After cleaning inner wall with
4.
a soft cloth or paper towel,
reassemble inner vent, retightening the two screws, and
replace Top Vent.
Make sure all parts are secure before plugging
OxyPure back in and turning on again.
Note: DO NOT unscrew the four outer screws located
toward the corners. Doing so will void your warranty.
Do not immerse the OxyPure in
water. Clean with a damp
sponge or cloth and wipe dry.
Make sure all parts and covers
are securely attached.
20
20
cleaning & maintenance
X
X
X
X

Publicidad

Tabla de contenido
loading

Tabla de contenido