General Instructions - ECOPOSTURAL T4426 Instrucciones

PORTABLE NECK AND CHEST MASSAGE DESKTOP
Ecopostural thanks you for buying our products. The item you have just purchased has been
manufactured according to high quality and security standard. Follow the below-mentioned
instructions carefully in order to be able to make use of it for a long time. Click on to the
TECHNICAL INFORMATION section in our website www.ecopostural.com.
* Our company will decline any responsibility for a product damage occurred if ignoring
our operating instructions. We will not be liable for any accident or harm resulting from
an undue or negligent use.

1) GENERAL INSTRUCTIONS

- Please read carefully the operating and safety instructions before using our product. These
instructions must be adhered to. Keep the instructions booklet for further check-ups.
- Familiarize yourself with the precise use of the Multi-function Chair.
- The use of the massage desktop may be dangerous when handled by unqualified people
in an inappropriate way or not according to the intended purpose. Be careful as there is a risk of
being trapped by the mobile parts and because of sudden movements.
- Regularly check the table entirely to find any sign of malfunction or damage.
- Worn or damaged pieces must be solely replaced by original pieces by the manufacturer
depending on the table model.
- All components parts or accessories should be fitted or fixed in according to the special
manufacturer's instructions. Any spare / replacement component part different to the
manufacturer could be dangerous for the people involved in the table handling.
* Notice: The use of non-original pieces or the alteration of the table frame will incur
in a loss of validity of the manufacturer's guarantee, instructions and Declaration of
Conformity.
2) OPERATING INSTRUCTIONS
This product is flat pack shipped thus prior to installation you will have to unfold the support
piece. To open the support piece release the chest levers (c) and lean this support piece
horizontally on an even surface (massage bench, table...) as shown in figure I. Mind that the
toothed pieces fit together correctly before tightening the levers again (Figure III).
To fold the support piece do the opposite way by simply positioning it vertically.
The chest piece can be adjusted in height by releasing the tubes. First loosen the bottom
nuts (d), then position the tubes at the required height as shown in Figure I. NOTICE: any alteration
of the tubes height will affect the whole chest piece thus modifying also the face cradle height.
To adjust the face cradle height first loosen the top fixing nuts (b), position the face cradle
to the required height and tighten the nuts (figure I).
To adjust the tilting release both levers (a) and place the cradle into the desired position.
It is more convenient to first release one pair of levers and then proceed with the other one as
shown in Figure I. Mind that the toothed pieces fit together correctly before tightening them again
(Figure III).
The chest and head cushions are supplied with Velcro allowing different positions.
T4426
English
5