Giatsu RA1A Manual De Usuario página 22

Buttons on remote controller
FAN button
Pressing this button can set fan speed circularly as: auto (AUTO), fan1(
fan3 ( ) , fan4 (
Note:
● In AUTO speed, air conditioner will select proper fan speed automatically according to ambient
temperature.
● Fan speed under dry mode is fan1.
● After entering the stepless speed mode, users can adjust the fan speed according to the
button"+" or"-".
button
Press this button the vertical swing function can be started and canceled.The remote
controller defaults to static swing condition.
Press "MODE" button and "
switch between simple swing and static swing.
In static swing condition, pressing button, the swing angle of horizontal louver changes as
below:
Note:
When selecting "
conditioner will swing up&down automatically at the maximum angle.
When selecting "
swing. Horizontal louver of air conditioner will stop at that position as shown by the icon to
swing.
button
Press this button the horizontal swing function can be started and canceled. The remote
controller defaults to static swing condition.
Press "MODE" button and "
switch between simple swing and static swing.
In static swing condition, pressing button, the swing angle of vertical louver changes as
below:
), fan5 (
AUTO
fan1
stepless speed
" button at the same time when remote controller OFF to
No display
" with remote controller, it's auto swing. Horizontal louver of air
, , , ,
" button at the same time at remote controller OFF to
), stepless speed.
fan2
fan5
" with remote controller,it's the fixed position
5
), fan2 (
fan3
fan4
) ,