EN
SELECTION OF THE LOCATION OF THE DEVICE IN A DEDICATED BUILDING.
The choice of the place of installation of the device in a dedicated building should be dictated by the
location of the chimney to which it will be connected. Dedicated installation gives you several possi-
bilities of chimney exit depending on the conditions created by the existing chimney installation, or
depending on the final chimney exit method.
CONNECTION OF THE DEVICE TO THE CHIMNEY SYSTEM.
The connection of the fireplace to the chimney system must comply with local building regulations
and the guidelines contained in the instructions of the appliance itself, for which the HOME EASY BOX
is only an accessory. If there are no local guidelines for the installation of the appliance and its chimney
installation, follow the instructions for the appliance and its connection included with the purchased
fireplace.
CONSERVATION
WARNING!!!!
All maintenance work should be carried out on a cooled down unit at least 12 hours after it has
been extinguished.
ATTENTION!!!!
Maintenance of the device may only be performed by a qualified service technician. It should
also be remembered that each heating appliance requires chimney sweeps in accordance with
the guidelines of the local building code, but at least once a year.
- The device should be periodically inspected at least once a year.
- Cleaning should take place regularly or as excess ash emerges.
- No changes may be made to the design of the unit.
- The device should not be cleaned with corrosive agents.
- When replacing individual components, use only original parts available from the manufacturer.
Fig. Maintaining a safe minimum distance from the non-flammable wall of 100 mm.
HOME/EASY/BOX
59