Sage Nutri Juicer Cold Plus Manual Del Usuario página 6

Assembly
Before fi rst use
Before using your juicer for the fi rst time, remove
and safely discard any packaging materials and
promotional stickers and labels.
Ensure the power cord is unplugged.
Wash the fi lter bowl surround, fi lter basket, juicer
cover, food pusher, pulp container and juice jug
and lid in warm, soapy water with a soft cloth.
Rinse and dry thoroughly.
1. Place motor base on a fl at, dry surface
such as a countertop. Ensure that the
juicer is switched to OFF at the dial,
and the power cord is unplugged.
2. Place fi lter bowl surround on top
of the motor base.
3. Align the arrows at the base of the
stainless steel fi lter basket with the arrows
on the motor drive coupling and push
down until it clicks into place to create
a secure fi t with the motor base.
6
4. Place the juicer cover over the fi lter bowl
surround, positioning the lower part of
the feed chute over the stainless steel
fi lter basket.
5. Raise the safety locking arm up and locate
into the two grooves on either side of the
juicer cover.
6. The safety locking arm should now be
in a vertical position and locked into place
on top of the juicer cover.