Chauvin Arnoux F401 Guía De Inicio página 12

English
1.1 THE ROTARY SWITCH
The rotary switch has five positions. To access the
switch to the desired function. Each setting is confirmed by an audible signal. The functions
are described in the table below ;
5
4
3
2
1
1.2 THE KEYS OF THE KEYPAD
1 2
4 5
, ,
Item
1 OFF mode – Switches the clamp
multimeter off
2 AC, DC voltage measurement (V)
3 Continuity test
Resistance measurement Ω
Diode test
4 AC current measurement (A)
5 Temperature measurement (°C/°F)
3
Item
1 Storage of values, disabling of
display
Compensation of the resistance of
the leads in the continuity and
ohmmeter function
2 Selection of the type of
measurement (AC, DC)
3 Activation or de-activation of the
backlighting
of the display unit
4 Activation or de-activation of the
MAX/MIN mode
Activation or de-activation of the
INRUSH mode in A
5 Frequency measurements (Hz)
Clamp Multimeter F401
, , functions, set the rotary
Function
Function