On/Off Button; Mode Button - Giatsu RA1A-WIFI Manual De Usuario

Buttons on remote controller
After connecting the power, the air conditioner will make a sound.
Power indicator is ON. After that, you can operate the air conditioner by using remote controller.
Under on status, pressing the button on the remote controller, the display will show the corresponding
set function icons.
Under off status, light and clock icon will be displayed on the display of remote controller (If timer
on, timer off and light functions are set, the corresponding icons will be displayed on the display of
remote controller at the same time).

ON/OFF button

Press this button can turn on or turn off the air conditioner.

MODE button

Press this button to select your required operation mode.
● When selecting auto mode, air conditioner will operate automatically according to ex-factory
setting. Set temperature can't be adjusted and will not be displayed as well. Press "FAN"
button can adjust fan speed. Press "
● After selecting cool mode, air conditioner will operate under cool mode. Press "+" or "-"
button to adjust set temperature. Press "FAN" button to adjust fan speed. Press "
" " button to adjust fan blowing angle.
● When selecting dry mode, the air conditioner operates at fan1, fan speed can't be adjusted.
Press " " or "
● When selecting fan mode, the air conditioner will only blow fan, no cooling and no heating.
Press "FAN" button to adjust fan speed. Press "
angle.
● When selecting heat mode, the air conditioner operates under heat mode. Press "+" or
"-" button to adjust set temperature. Press "FAN" button to adjust fan speed. Press "
" " button to adjust fan blowing angle. (Cooling only unit won't receive heat mode signal.
If setting heat mode with remote controller, press "ON/OFF" button can't start up the unit).
Note:
● For preventing cold air, after starting up heating mode, indoor unit will delay 1~5 minutes
to blow air (actual delay time is depend on indoor ambient temperature).
● Set temperature range from remote controller: 16~31°C;
Fan speed: auto, fan1, fan2 , fan3 , fan4, fan5, stepless speed.
Auto
Cool
" button to adjust fan blowing angle.
Dry Fan
" or " " button can adjust fan blowing angle.
" or "
5
Heat
" button to adjust fan blowing
" or
" or