Alcad 9800041 Manual Del Usuario página 11

VIDEOPORTERO DIGITAL - DIGITAL VIDEO DOOR ENTRY SYSTEMS - VIDEOPORTIER NUMÉRIQUE
Funcionamiento (Conserjería desactivada) - Operation (Concierge unit deactivated) - Fonctionnement (Conciergerie désactivée)
Configure the entrance panel of the external point of entry as the external panel (E) (See "Configuration of exterior entrance panel (E)", page
29). Configure the entrance panel of each building as the main panel (P) (See "Configuration of the main entrance panel (P)", page 27). This
entrance panel will be activated when the auto switch-on function is used from the monitor.
The function activating the electric lock from the entrance panels remains enabled at all times.
SYSTEM ON STANDBY
The monitors are inactive (communication with the entrance panel and door opening functions are disabled). If the handset of a monitor is lifted,
an uninterrupted tone will be heard. It is possible to activate the monitor's switch-on system.
SYSTEM ACTIVE.
Only the monitor whose code is identical to the code which has been entered will receive the call. Confirmation of the call on the entrance panel.
If the handset of another monitor in the same building is picked up, intermittent tones will be heard and the auto switch-on function will not
operate. If the handset of the requested monitor is off the hook or if the code does not correspond to any monitor, the panel will emit intermittent
tones. When several monitors are installed in the dwelling, all of them receive the call. The first monitor to be answered will establish communication
with the the entrance panel.
Time setting to answer: Configurable (Position 7 from the configuration menu).
Maximum time setting for conversation: Configurable (Position 6 from the configuration menu).
During both these periods of time, the entrance panel display will show the code which has been entered. The panels of the other blocks will
remain on standby until a call has been made. If the call is made from the external point of entry, the entrance panel of the building where the
monitor is located will be deactivated (blocked). The display of this panel will show how much longer the panel will remain blocked.
.