Preparing To Charge A Battery - Southworth LS Serie El Manual Del Propietario

1. Be sure area around the lift and battery is well ventilated while the battery is being charged.
2. Shut off Battery Disconnect if so equipped.
3. The battery terminals, connections, and wiring including the plug in the battery box and charger connections
should be clean and free of corrosion. When cleaning any of these components wear a face shield or other
suitable protective eyewear.
4. Read, understand, and follow all battery and battery charger manufacturer's specific precautions while working
with and/or charging batteries.
1. Locate the charger as far away from the battery as the cables permit above floor level.
2. Do not operate charger in a closed area or restrict ventilation in any way.
Charger should be grounded to reduce risk
of electric shock. The charger is equipped
with an electric cord having an equipment-
grounding conductor and grounding plug.
The plug must be plugged into an outlet that is
properly installed and grounded in accordance
with all local codes and ordinances.
Never alter the AC cord or plug provided. If
it will not fit the outlet, have a proper outlet
installed by a qualified electrician. Improper
connection can result in a risk of electric
shock.
12
Southworth Owner's Manual -- LS Series

Preparing to Charge a Battery

Locating the Charger
PRECAUTIONS FOR GROUNDING
AND AC POWER CORD CONNECTION
DANGER
Figure 6 – Pinch Points