Cequent Performance Products 75219 Instrucciones De Instalación página 5

5. Gently pull away the sides of the bumper cover until it detaches from
vehicle. Disconnect the harness at the bumper, and put the bumper cover
aside.
7. Raise the hitch into position, sandwich the hitch between the frame and
the bumper, and loosely install the factory bolts.
8. Tighten all M10 fasteners to 42 lb-ft.
Proper torque is needed to keep the hitch secure to the vehicle when
towing.
©2015 Cequent™ Performance Products, Inc. - Printed in Mexico
6. Remove (6) bolts with a 15mm socket and put the bumper aside.
9. Reinstall the bumper cover, harness and taillights in reverse order.
Sheet 5 of 15 75219NP 6-1-15 Rev. A