Series 912 - Ms; Safety Instructions - Alcad 912-MS Serie Manual De Instalación Y Programación

SERIES 912 - MS

Modular TV-modulator equipment which generates an analogue TV
channel from the audio and video signals.
1.

SAFETY INSTRUCTIONS

Make every A/V, RF and supply connections before connecting the units
to the mains.
To meet safety regulations, a differential cutout must protect the electric
installation. To connect the supply to the mains, use a connecting strip.
The green and yellow supply cable must be
grounded to the mains.
Do not remove the supply, amplifier or
modulator lids while the unit remains
plugged to the mains. Authorised technical
staff must carry out all repairs.
manipulation of the units cancels all
guarantees.
Fig. 3 - Temperature range
Serie 912-MS
Fig. 1 - Device groundconnection
Fig. 2 - Do not manipulate while connected
Make sure that the unit is properly ventilated. For
installation in a chest, use a SP-226 chest (Cod.
9120131) together with the VE-500 ventilator (Cod.
9050043). A unit working outside its temperature
range (-10 to +45°C) can be damaged beyond
repair. Do not block or cover the supply or cabinet
ventilation slots.
Internal
ENG - 17