Publicidad
Idiomas disponibles
Idiomas disponibles
EN
Introduction
-
The Mini LED amplifier for RGB LED strips allows the signal to reach the
whole LED strip, so the power flows stably through the strip without any
drop in voltage along its length. It has one input and one output jack to join
two LED strips and 2 outputs for the desired power source.
5
Specifications
The specifications of this amplifier include:
6. Input polarity protection.
7. Controls up to 10 metres of LED strips or other LED device.
8. Multi-level, with input power source polarity protection.
9. 2 signal input/output connectors and 2 for power input/output.
10. Resistant to radio frequency interference.
Technical Parameters
Supply Voltage
Current
Output Channels
Output Power
Type of Output
Protections
Working Voltage
Weight
12VDC
4ª * 1 Canal
3
144W (12VDC)
Constant Voltage
Polarity Inversion/Overvoltage
/Overcurrent/Short Circuit
-20º + 60ºC
42G
6
Publicidad
