Ecco 3735 Serie Instrucciones De Instalación Y Funcionamiento página 3

6-32 x 1-1/4
SELF-TAPPING
SCREWS
FIGURE 4 - A3730TNK
BOOT/TRUNK BRACKET
6-32 x 1-1/4
SELF-TAPPING
SCREWS
ADHESIVE PAD
FIGURE 6 - A3730WIN
WINDOW BRACKET
Make sure the mounting surface is clean before applying the bracket. A 50%
isopropyl alcohol and 50% water solution is recommended for cleaning any
mounting surface. Remove the backing from the adhesive pad on the bracket.
Press the adhesive on the bracket firmly against the mounting surface. The
adhesive will reach 20% of its maximum bond after 20 minutes, 75% after 1
hour, and 100% after 3 days. Mount the 3735 to the bracket as shown using
the two #6 screws through the front of the unit.
920-0214-00 Rev. E
MOUNTING
BRACKET
MOUNTING
BRACKET
Mount the A3730LIC bracket to the lower or upper two license plate
screw holes between the plate and the vehicle. Then, mount the 3735
lights onto the bracket as shown.
6-32 x 1-1/4
SELF-TAPPING
SCREWS
FIGURE 5 - A3730DCK
DECK BRACKET
US style license plate only.
6-32 x 1-1/4
SELF-TAPPING
SCREWS
FIGURE 7 - A3730LIC
LICENSE PLATE BRACKET
MOUNTING
BRACKET
MOUNTING
BRACKET
Page 3 of 12