Troubleshooting - Espressione 26260 Manual Del Usuario

EN
PUTTING OUT OF SERVICE
If you want to put the machine out of service, you must disconnect it electrically, empty the water tank
and drip tray and clean it (see the paragraph on "Cleaning the appliance").
In the case of scrapping, you must separate the various materials used in making the machine and
dispose of them based on their composition and on the legal provisions in force in the country of use.

TROUBLESHOOTING

Warning!
If there are problems with operation, immediately turn off the machine and unplug it from the socket-
outlet.
Problems
The coffee maker
does not supply
boiling water for
tisanes.
Steam coming out
of the edges of
the fi lter holder.
The coffee maker
does not supply
steam.
A few drops of
water come out of
the caraffe
Causes
Probably an
amount of ground coffee
has been placed in the fi l-
ter ring preventing the fi lter
ring from being correctly
tightened into its housing.
Cappuccino steam
hole clogged.
The machine is trying to
dispense coffee with the
steam function on. Make
sure that the steam dial is
not turned on for any rea-
son.
There is little water and the
pump does not suck it up.
Cappuccino steam
hole clogged
The caraffe is not well-
positioned under the nylon
fi lter support dispenser.
The water level in the tank
exceeds the maximum le-
vel.
Solutions
excess Make sure the tank is properly inserted
and that the water is not below the mini-
mum level. Repeat the operations descri-
bed in the "Preliminary phases for use"
paragraph.
exit Unclog any deposits that may have for-
med in the hole of the cappuccino maker
with a pin.
Stop pouring coffee, turn the steam di-
spensing valve(12) to position'●' to
stop the steam. Wait for the light on the
"ESPRESSO" button (L) to switch off be-
fore pouring a new coffee.
Check that the water level in the tank is
correct. If necessary, fi ll it with cool tap
water.
exit Unclog any deposits that may have for-
med in the hole of the cappuccino maker
with a pin.
Centre the carafe lid under the dispenser
in the fi lter support.
Fill the tank up to the MAX level.
12