For Future Reference - brentwood Kool Zone F-1831B Instrucciones De Operación Y Seguridad

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

 The marked electrical rating must be at least as great as that of the product;
 If the product is of a 3-prong grounding type, the extension cord must be a
grounding-type 3-wire cord.
 Arrange the extension cord so that it will not drape over the countertop or
tabletop where it can be tripped over or pulled.
WARNING: This product is equipped with a polarized plug (one blade
is wider than the other blade) to reduce the risk of electrical shock.
This is a safety feature. The plug will fit into a polarized outlet only
one way. If you are unable to insert the plug into the electrical
outlet, try reversing the plug. If the plug still does not fit, contact a qualified
electrician. Never use the plug with an extension cord unless you can fully insert the
plug into the extension cord. Do not alter the plug. Do not attempt to defeat the
safety purpose of the polarized plug.
Assembly Instructions
Do Not plug in before properly assembling Fan.
IMPORTANT: Please check all packaging material carefully before discarding as there
may be accessory parts contained within the packaging material.
Attention: First use may cause a slight odor or small smoking upon heating, it is
normal. This is a result of the heating element chemical reaction. It quickly goes away.
Stand Fan (See Figure 1)
1. Using nut and bottom weight to secure the STAND to the BASE.
2. Assemble FRONT and BACK GRILLS with BLADES and secure with screws to the
MOTOR HEAD.
3. Attached MOTOR HEAD to assembled STAND and tighten screw.
Floor / Table Fan (See Figure 2)
1. Using screws, assemble both BAR pieces together to form the floor stand (Detail
B).
2. Assemble FRONT and BACK GRILLS with BLADES and secure with screws to the
MOTOR HEAD.
3. Attached MOTOR HEAD to assembled STAND (Detail A).
Wall Fan (See Figure 3)
1. Assemble GRILLS with BLADES and MOTOR HEAD same as above.
2. Attach to floor stand same as above.
3. Secure HOOKS into wall with screws and nuts. Hang fan on HOOK
SAVE THESE INSTRUCTIONS

FOR FUTURE REFERENCE

3

Publicidad

Tabla de contenido
loading

Tabla de contenido