Casals CNPD16REAK Manual Del Usuario página 4

before use. Many accidents are caused by poorly
maintained power tools
- Keep cutting tools sharp and clean. Properly maintained
cutting tools with sharp cutting edges are less likely to bind
and are easier to control.
- Use the power tool, accessories and tool bits etc. in
accordance with these instructions, taking into account
the working conditions and the work to be performed.
Service
- Have your power tool serviced by a qualified repair
person using only identical replacement parts. This will
ensure that the safety of the power tool is maintained
Any misuse or failure to follow the instructions for use
renders the guarantee and the manufacturer's liability null
and void.
- Any misuse or failure to follow the instructions for use
renders the guarantee and the manufacturer's liability null
and void.
Drill Safety Warnings
- Wear ear protectors when impact drilling. Exposure to
noise can cause hearing loss.
- Use auxiliary handle(s), if supplied with the tool. Loss
of control can cause personal injury.
- Hold power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory
may contact hidden wiring or its own cord. Cutting
accessory contacting a "live" wire may make exposed metal
parts of the power tool "live" and could give the operator
an electric shock.
- Switch off the power tool immediately when the tool
insert jams. Be prepared for high reaction torque that
can cause kickback. The tool insert jams when the power
tool is subject to overload or it becomes wedged in the
workpiece.
- Hold the machine with a firm grip. High reaction torque
can briefly occur while driving in and loosening screws.
Additional safety warnings
- CAUTION: In order to prevent overheating do not cover
the appliance.
- Ensure that neither the air access nor exit become either
totally or partially covered by drapery, clothing, etc., as this
increases the risk of fire.
- Do not use the appliance if the cable or plug is damaged.
- Ensure that the voltage indicated on the rating label
matches the mains voltage before plugging in the appliance.
- If any of the appliance casings breaks, immediately
disconnect the appliance from the mains to prevent the
possibility of an electric shock.
- Do not use the appliance if it has fallen on the floor, if there
are visible signs of damage or if it has a leak.
4
- CAUTION: Maintain the appliance dry.
- Do not use the appliance with damp hands or feet, or when
barefooted.
- Do not touch the plug with wet hands.
- Use suitable detectors to determine if utility lines are
hidden in the work area or call the local utility company
for assistance. Contact with electric lines can lead to
fire and electric shock. Damaging a gas line can lead to
explosion. Penetrating a water line causes property damage
or may cause an electric shock.
Keep your hair, clothing and gloves away from moving
parts. Loose clothes, jewellery or long hair can be caught
in moving parts.
- If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of dust collection can
reduce dust-related hazards
- Use clamps or a vise to secure the object to be worked
in place. The work will be safer if both hands are free to
control the tool.
- Do not touch any of the appliance's moving parts while
it is operating.
- Protect yourself from contact with and the inhalation of dust
created by sanding wood and metal surfaces and surfaces
coated with lead paint. Use protective equipment that
complies with the appropriate health and safety regulations.
- When working in amianthus/asbestos and/or silica stone,
the dust produced is extremely harmful to your health. Wear
protection against inhalation of this dust, in compliance with
current regulations on accident prevention.
- When working take care to avoid electric wires and gas or
water pipes in order to avoid an electric shock.
- Exercise precaution after employing the stop operation on
the appliance as the tool will continue moving from the effect
of its own mechanical inertia.
- Use of the power tool for operations different from those
intended could result in a hazardous situation
- Fully unroll the appliance's power cable before each use.
- Do not use the appliance if its accessories are not properly
fitted.
- Do not use the appliance if the accessories or consumables
attached to it are defective. Replace them immediately.
- Use the appliance handle/s, to catch it or move it.
- This appliance is for professional use.
- This appliance is not a toy. Children should be supervised
to ensure that they do not play with the appliance.
- Do not expose the appliance to extreme temperatures.
- Let the appliance running with no load for 30 seconds in a
safe position. If you notice serious vibration or other defects
stop the appliance immediately. Then check the problem
and /or proceed as we describe on Anomalies and Repair
clause.
- Alwa
any ob
cloths
- Che
work e
- Keep
area w
Produ
Descr
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Befor
- Mak
remov
- Ens
match
- Prep
to use
Auxili
- Whe
- The
loosen
counte
- Set d
- Tigh
(5) clo
Insert
- To o
take fi
part o
- Inse
requir
secure
into th
and tu
closed