Blumfeldt Lamera Manual Del Usuario página 8

EN
8
MOUNTING WITH DOWELS
Place the expansion dowels in the
recess of the toilet.
Remove the toilet seat again. Tighten
the screws and place the stainless
steel cover on the hinges.
If you press the button 1x, you can
remove the toilet seat with both
hands afterwards.
Attach the anti-slip washer to the
bottom of the black hinge and place
both on the recess of the toilet.
Insert the screws through the slot
of the hinges into the inserted
expansion anchors. Do not tighten
the screws completely and then
place the toilet seat on the hinges.
Now you can align the toilet seat.
Place the toilet seat back on the
hinges.
Required for installation:
Screwdriver
Toilet seat (1x)
Expansion dowels (2x)
Hinges (2x)
Anti-slip washers (2x)
Screws (2x)
Hinge covers (2x)