Armrest; Armrest Adjustment - Grammer MAXIMO XT EVOLUTION DYNAMIC Manual Del Usuario

Seat functions and operation
-
+
32

Armrest

The left armrest can be folded backwards and
the height can be individually adjusted, if
required.
To adjust the armrests for height, separate
the round cap (see arrow) from the cover,
loosen the hexagon nut (size 13 mm) behind
it. Put the armrest to the desired position and
tighten the hexagon nut. Replace the cap onto
the cover.

Tighten the hexagon nut with 25 Nm.

Do not damage any heating cables
when loosening or tightening the hexagon nut.
If necessary, carefully put aside heating
cables lying in front of the hexagon nut.

Armrest adjustment

The inclination of the armrest can be modified
by turning the adjustment knob.
When turning the knob to the outside (+),
the front part of the armrest will be lifted;
when turning the knob to inside (-), it will
be lowered.
GB