Preparing The Measurement; Starting A Measurement; Stopping A Measurement And Displaying The Data; Measurement Schemes - Panasonic MINAS A6 Multi Serie Referencia Técnica

•
All Internet and LAN-based applications (e.g. e-mail programs) running in the background
should be closed before commencing with the measurement.

5.10.3.1 Preparing the measurement

Select the desired scheme: For a speed- or position-oriented measurement, the current control time of the
Safety Part is displayed on X axis. It represents a continuously increasing counter for the system selectors of
the Safety Part. The measurement data for the curve are constantly updated and stored in the temporary
memory. After stopping the recording, the measurement data can be manually saved in an XML file.
•
When the scheme is changed, recorded data from the previous measurements are lost.
When changing the window size, the displayed data must be rescaled. This requires a
position-oriented measurement and the reset of the data buffer by clicking Reset button in
scope window.

5.10.3.2 Starting a Measurement

The "Capture" button for starting a measurement is available only if AC Servo Driver MINAS A6 Multi series is
active. After clicking this button, the data is cyclically transferred to the buffer and displayed from left to right in
the diagram. An active recording can be stopped with "Stop" button.

5.10.3.3 Stopping a measurement and displaying the data

After completion of the measurement, the data can be analyzed by moving the slide bars accordingly.

5.10.3.4 Measurement schemes

The scope can support following measurements.
Speed Encoder
-
Position Pass 1
-
Speed Pass 1
-
Encoder Data
-
SDI Position
-
SDI Speed
-
SLI
-
SEL
-
SSX
-
SAR
-
SLP
-
SLS
-
SCA
-
SCA Position
-
SOS Position
-
SOS Speed
-
SLA
-
EVC Position
-
EVC Speed
-
Procedure
5-26