Panasonic MINAS A6 Multi Serie Referencia Técnica página 86

6.1 Validation Report
PANATERM for Safety uses it to create a validation report for the hardware configuration. This function is only
available for an active connection with an AC Servo Driver MINAS A6 Multi series. This function can be
activated via "Generate Report" icon in the toolbar.
In "Document Properties" window, information and descriptions can be entered or edited.
◼ Fields with the device information for the configuration report
Each field has a lock function.
The report is saved in a PDF file and can then be edited.
•
The printed file serves as a template for the safety-relevant inspection!
•
The report cannot be created until the logic plan has been saved.
The created file (*.pdf`) has the same name and is located in the same directory as the
corresponding logic plan.
Step: Edit the header in the report
The following fields can be edited in the header.
Item Description
End customer Name of the customer
Labelling Plant description
Configuration Configuration name
Validation Report
6-2