Descargar Imprimir esta página

Reelcraft 5000 Serie Instrucciones De Operación

Publicidad

Idiomas disponibles

Idiomas disponibles

Enlaces rápidos

Operating Instructions
Series 5000 Spring Driven Hose Reels
Medium Pressure Model Numbers:
5400 OMP
5435 OMP
5420 OMP
5600 OMP
5430 OMP
5620 OMP
Dimensions
INSTALLATION:
A flexible hose connection must be used between the hose reel inlet and the source of supply to prevent possible
misalignment and binding.
MOUNTING:
The hose reel is equipped with a universal mounting bracket so that it can be mounted on the floor, wall or
ceiling; whichever place is convenient. The hose guide arm can be moved to the position desired by removing
the screws fastening the guide bracket to the reel base. Shift the guide arm bracket so the hose comes off the
reel at the desired position and replace the screws. NOTE: For proper installation in wall mount applications, ensure
reel is mounted with inlet on the right as you are facing the reel. Failing to do so could cause latching issues.
LUBRICATION:
Hose reel spring and bearings are factory lubricated and require no further lubrication.
REPLACING HOSE: 1. Wind spool flange clockwise-facing swivel-until spring is tight.
2. Back off three turns and latch.
3. Insert hose through roller guide.
4. Connect hose fitting to swivel joint and secure hose with clamps.
ADJUSTMENTS:
To adjust spring tension, add or remove wraps of hose from the spool, one wrap at a time until desired tension is
obtained.
REPAIRS:
Extensive repairs should be performed only by an authorized serviceman or factory to avoid damage which may
void your warranty. Remove all spring tension before beginning disassembly process.
Reelcraft Industries, Inc. • 2842 E Business Hwy 30, Columbia City, IN 46725
Ph: 800-444-3134 / 260-248-8188 • Fax: 800-444-4587 / 260-248-2605
Customer Service: 855-634-9109 • reelcraft@reelcraft.com • www.reelcraft.com
5625 OMP
5630 OMP
A
14 3/8"
B
14"
C
9 3/4"
D
2 1/2"
E
6 1/8"
1. Do not use reel at higher pressures or temperatures than listed on
the back of this bulletin.
2. Remove all spring tension before beginning dissassembly process.
SAFETY
Form# 833-696 Rev: 3/2018

Publicidad

loading

Resumen de contenidos para Reelcraft 5000 Serie

  • Página 1 Remove all spring tension before beginning disassembly process. Form# 833-696 Rev: 3/2018 Reelcraft Industries, Inc. • 2842 E Business Hwy 30, Columbia City, IN 46725 Ph: 800-444-3134 / 260-248-8188 • Fax: 800-444-4587 / 260-248-2605 Customer Service: 855-634-9109 • reelcraft@reelcraft.com • www.reelcraft.com...
  • Página 2 Max. Operating Pressure 3000 P.S.I. 2750 P.S.I. 2750 P.S.I. 2750 P.S.I. 3000 P.S.I. 2600 P.S.I. 2600 P.S.I. 2600 P.S.I. Max. Operating Temperature 210 °F 210 °F 210 °F 210 °F 210 °F 210 °F 210 °F 210 °F Page 2 www.reelcraft.com...
  • Página 3 Remueva todos los resortes de tension antes del proceso de desmontaje. Page 3 Reelcraft Industries, Inc. • 2842 E Business Hwy 30, Columbia City, IN 46725 Ph: 800-444-3134 / 260-248-8188 • Fax: 800-444-4587 / 260-248-2605...
  • Página 4 3000 P.S.I. 2750 P.S.I. 2750 P.S.I. 2750 P.S.I. 3000 P.S.I. 2600 P.S.I. 2600 P.S.I. 2600 P.S.I. maxima temperatura de operacion 210 °F 210 °F 210 °F 210 °F 210 °F 210 °F 210 °F 210 °F Page 2 www.reelcraft.com...
  • Página 5: Instructions D'opération

    Enlevez toute tension de ressort avant de désassembler. Page 5 Form# 833-696 Rev: 3/2018 Reelcraft Industries, Inc. • 2842 E Business Hwy 30, Columbia City, IN 46725 Ph: 800-444-3134 / 260-248-8188 • Fax: 800-444-4587 / 260-248-2605 Customer Service: 855-634-9109 • reelcraft@reelcraft.com • www.reelcraft.com...
  • Página 6 3000 P.S.I. 2750 P.S.I. 2750 P.S.I. 2750 P.S.I. 3000 P.S.I. 2600 P.S.I. 2600 P.S.I. 2600 P.S.I. température d'opération maximum 210 °F 210 °F 210 °F 210 °F 210 °F 210 °F 210 °F 210 °F Page 6 www.reelcraft.com...

Este manual también es adecuado para:

5400 omp5420 omp5430 omp5435 omp5600 omp5620 omp ... Mostrar todo