Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
1
Preparing for installation
□
Remove the existing showerhead, shower
arm (counterclockwise) and ange with a
wrench.
3
Finishing the installation
□
Turn on the water supply, check for leaks, and
tighten as needed.
Care and Cleaning
□
Preserve the nish of the showerhead using a non-abrasive wax.
□
When using non-abrasive cleaners, rinse off immediately when nished cleaning the showerhead.
□
Do not use abrasive cleaners when cleaning this showerhead.
2
Installing the showerhead
□
Apply the thread sealant tape to the shower arm .
□
Hand-tighten the showerhead (A) (clockwise) onto
the shower arm .
4
A
Publicidad
Tabla de contenido
