Safety Precautions - Kruger K100 Instrucciones Para El Uso

INDEX
Main constructive components
1
General safety advice
2
3 Connection of water supply pipe
4 High pressure pipe connection
Electrical connection of appliance
5
We wish to thank you for choosing our machine. We are confident that the high quality of our machine will meet with your
satisfaction and appreciation and that your pressure washer will give you long-lasting service. Before starting to use your
machine, make sure to read with care this manual, which has been purposely drawn up to provide you with all the necessary
information for proper use of the machine, in compliance with basic safety requirements
1 1 1 1 1
MAIN COMPONENTS (Fig. 1)
1) Power plug
2) Main switch
3) Water supply rapid attachment
4) Filter
5) Foam nozzle
6) Variable nozzle jet
7) Spray gun
8) Spray gun safety device
9) Water delivery attachment
10) High pressure pipe
11) Instructions booklet
12) Variable nozzle head
13) Foam sprayer holder
14) Turbo nozzle head (optional)
2 2 2 2 2

SAFETY PRECAUTIONS

Do not use the device in the
vicinity of persons, unless they
are wearing
protective garments.
High pressure jets may be
dangerous if used incorrectly, the
jet must never be directed on
persons, live electrical appliances,
including the appliance itself. Never use the
jet to clean your own garments or footwear.
The high pressure of the water
generated and connection to the
electricity
particularly serious danger risks.
Carefully read the user
instructions before starting
the machine for the first time.
Follow the safety warnings.
pag.9
pag.9
pag.11
pag.11
pag.11
the necessary
supply constitute
Appliance switch on
6
7 Appliance switch off
Accessories
8
Maintenance and repairs
9
10 Trouble shooting guide
The appliance must be used solely by personnel trained
in its use and specifically authorized to use it.
The user manual must be made available to all users.
Do not subject the machines to any modifications
which may jeopardize personal safety.
Using extensions, check the minimum section of the
individual cables (see paragraph entitled "Connection
to the mains appliances").
Install the extensions in such a way as not to alter the
protection class of the appliance.
In the event of the use of extensions, the plug and
socket must be of waterproof type.
The use of unsuitable extension leads may constitute a
danger risk.
Your electrician can give you the necessary
information on the protection classification.
The electrical system to which the appliance is
connected must be realized in compliance with the
laws of the country of installation. The presence of a
differential magnetothermal switch is necessary with
a sensitivity of equivalent to 30 mA, above the power
socket or the system.
Only put the appliance into operation providing that
all components are free of defects.
Firstly check the mains attachment wire, the high
pressure pipe, the spraying device and the body.
Do not tread on the high pressure pipe; do not pull,
bend or twist it.
Do not shift the appliance by pulling it by the high
pressure pipe.
Never operate with a defective high pressure pipe,
but always replace with original spare.
The high pressure pipe must be homologated for the
permitted working overpressure of the appliance.
9
pag.11
pag.11
pag.11
pag.12
pag.12