Technical Specifications - STEINEL PROFESSIONAL HF 3360 Información

Ocultar thumbs Ver también para HF 3360:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 28
8� Operation / maintenance
The sensor is suitable for switching on a light automatically. The unit is not suitable
for burglar alarm systems as it is not tamperproof in the manner prescribed for such
systems. The surface can be cleaned with a damp cloth (without detergents) if dirty.
9� Disposal
Electrical and electronic equipment, accessories and packaging must be recycled in
an environmentally compatible manner.
Do not dispose of electrical and electronic equipment as domestic waste.
EU countries only:
Under the current European Directive on Waste Electrical and Electronic Equipment
and its implementation in national law, electrical and electronic equipment no longer
suitable for use must be collected separately and recycled in an environmentally
compatible manner.
10� Declaration of Conformity
Hereby, STEINEL Vertrieb GmbH declares that the radio equipment type HF 3360 is
in compliance with Directive 2014/53/EU. The full text of the EU declaration of con-
formity is available at the following internet address: www�steinel�de
11� Manufacturer's Warranty
As purchaser, you are entitled to your statutory rights against the vendor. If these
rights exist in your country, they are neither curtailed nor restricted by our Warranty
Declaration. We guarantee that your STEINEL Professional sensor product will remain
in perfect condition and proper working order for a period of 5 years. We guarantee
that this product is free from material-, manufacturing- and design flaws. In addition,
we guarantee that all electronic components and cables function in the proper man-
ner and that all materials used and their surfaces are without defects.
Making Claims
If you wish to make a claim, please send your product complete and carriage paid
with the original receipt of purchase, which must show the date of purchase and
product designation, either to your retailer or contact us at STEINEL (UK) Limited,
25 Manasty Road, Axis Park, Orton Southgate, Peterborough, PE2 6UP, for a re-
turns number. For this reason, we recommend that you keep your receipt of purchase
G B
1
3
Y E A R
Y E A R
MANUFACTURER'S
MANUFACTURER'S
WARRANTY
WARRANTY
26
in a safe place until the warranty period expires. STEINEL shall assume no liability for
the costs or risks involved in returning a product.
For information on making claims under the terms of the warranty, please go to
www�steinel-professional�de/garantie
If you have a warranty claim or would like to ask any question regarding your product,
you are welcome to call us at any time on our Service Hotline 01733 366700.
5
Y E A R
MANUFACTURER'S
WARRANTY
12� Technical specifications
Surface-mounted installation, round Ø 126 × 52 mm
Dimensions
Surface-mounted installation, square
(L × W × H)
Concealed installation, round Ø
Concealed installation, square
Mains power supply
220 - 240 V, 50 / 60 Hz max. 2.5 mm
Angle of coverage
360° with 180° angle of aperture
Application
inside buildings
Sensor system
5.8 GHz high frequency
Transmitter power
approx. 1 mW
Time setting
5 s - 15 min
2-core control cable, single-master controller/broadcast
application
DALI output
Guaranteed supply current
Maximum supply current
User-friendly DALI function,
ON, OFF, 10 - 30 min, all night, 10 - 50%
Basic brightness
Twilight setting
2-1000 lux + teach mode
Manual override
selectable (4 h)
(permanent light)
IP rating
Surface-mounted: IP 54
Temperature range
- 20°C to + 50°C
Mounting height
2 - 2.8 m
95 × 95 × 52 mm
124 × 64 mm
94 × 94 × 64 mm
2
60 mA
250 mA
Concealed: IP 20
27

Publicidad

Tabla de contenido
loading

Tabla de contenido