Accessories (Optional); Maintenance / Care - STEINEL PROFESSIONAL HF 3360 KNX Información

• Detach designer trim from sensor module.
• Disconnect sensor module from the load module.
Concealed mounting (Fig� 5�1 / 5�2)
• Make plug connection.
• Press the programming button .
• Insert fastening screws and mount load module.
• Make settings. (➔ 6� Functions and settings)
Surface mounting (Fig� 5�3 / 5�4)
• Insert fastening screws and mount load module.
• Make plug connection.
• Press the programming button (B).
• Make settings. ( Functions and settings)
• Fit sensor and load module together and screw into place.
• Fit designer trim.
Reach diagram (Fig� 5�5)
6� Functions/settings
You will find an application description at knx�steinel�de
Functions to be used are selected from the "General Settings" parameter window
using the Engineering Tool Software (ETS) from version ETS4.0.
1. Issue physical address and generate application program in the ETS.
2. Load the physical address and application program into the motion detector.
When you are prompted, press programming button
3. The red LED goes out once programming has been successfully completed.
Functions, RC6
– Service mode
– Reach, sensor sensitivity HF
– Light level, brightness setting, teach-in
– Lighting control stay-ON time
– HVAC switch-ON delay, room surveillance, HVAC stay-ON time
– Basic lighting stay-ON time, brightness setting, teach-in
– Presence- and lighting test mode
.
20
Functions, RC7
– Dimming function
– Light ON/OFF 4 h
– Saving, activating scene
– Reset
Smart Remote
– Replaces remote controls RC6 and RC7
– Control via smartphone or tablet
– Load appropriate app and connect via Bluetooth
Additional functions, Smart Remote
– Programme mode
LED function
– Programming mode: LED ON
– Normal mode: LED stays OFF
– Test mode: LED lights up on detecting movement
– Remote control: LED flashes 10 times per second
Detailed descriptions are provided in the operating instructions for the particular
remote control.
7� Accessories (optional)
– User remote control RC6 EAN 4007841 593018
– Service remote control RC7 EAN 4007841 592912
– Smart Remote EAN 4007841 009151
8� Maintenance / care
No maintenance possible.
The detector lens may be cleaned with a damp cloth if it becomes dirty (do not use
cleaning agents).
9� Disposal
Electrical and electronic equipment, accessories and packaging must be recycled in an
environmentally compatible manner.
Do not dispose of electrical and electronic equipment as domestic waste.
21