Regular Checks; Servicing - Wayscral ANYWAY E-450 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 68

Regular checks

Regarding the tightening of the bolts: lever, crank, pedals, brackets.
The tightening torques to be applied are as follows:
COMPONENTS
Pedals on crank arms
Crank arm on bottom bracket
Steering tightness
Headset tightening
Brake lever
Brake calipers
Seat
Seat post clamp
Wheel
The other tightening torques depend on the size of the nuts: M4: 2.5 to 4.0 Nm, M5: 4.0 to 6.0 Nm,
M6: 6.0 to 7.5 Nm. Tighten the screws evenly to the required torque.
Regularly check the tyres: wear, cuts, cracks, pinching. Replace the tyre if necessary. Check the wheel
rims for excessive wear, warping, denting, cracks...

Servicing

For safety reasons and to keep the components in good working order, you should have your bicycle
regularly serviced by your retailer. Your bicycle should also undergo regular maintenance by a qualified
technician.
First service: 1 month or 150 km
Check the components are properly tightened: crank arm, wheel, stem, pedals, handlebars,
seat clamp,
Check the power assistance system is working correctly,
Check and adjust the brakes,
Tighten and/or straighten the wheels.
Tyre pressure
Every year or 2000 km:
Check the wear levels (brake pads, gear system, tyres),
Check the power assistance system is working correctly,
Check the bearings (chain set unit, wheels, steering, pedals),
Check the cables (brakes, derailleur, suspension) or hydraulic brake hoses,
Tighten and/or straighten the wheels.
Tyre pressure
RECOMMENDED TORQUE
(Nm)
34 - 40
45 - 55
5 - 8
5 - 8
8
10
7 - 10
7 - 14
Quick clamp
39
SPECIAL INSTRUCTIONS
Lubricate the threads
Lubricate the threads

Publicidad

Tabla de contenido

Solución de problemas

loading

Tabla de contenido