HP Color LaserJet Pro M454 Guía Del Inicio Rápido página 3

6. Set up HP ePrint via email (optional)
Use HP ePrint via email to print documents by sending them as an email attachment to the printer's email address from any email enabled device, even from devices that are
not on the same network.
To use HP ePrint via email, the printer must meet these requirements:
• The printer must be connected to a wired or wireless network and have Internet access.
• HP Web Services must be enabled on the printer, and the printer must be registered with HP Connected.
Enable HP Web Services
Non-Touchscreen control panels
1. After the printer is connected to the network, print a configuration page
and identify the printer IP address.
2. At the computer, open a web browser and enter the printer IP address into
the address line. The HP Embedded Web Server (EWS) opens.
3. Select the HP Web Services tab, click Setup, click Continue, and then
follow the onscreen instructions. The printer configures the connection
to the Internet. An information page prints, which contains a printer code
necessary to register the HP printer at HP Connected.
4. Go to www.hpconnected.com
the setup process.
Troubleshooting
User guide
The user guide includes printer usage and troubleshooting information. It is available
on the Web:
1. Go to www.hp.com/support/colorljm454.
2. Select the printer if prompted, and then click User Guides.
Check for firmware updates
1. Go to www.hp.com/support/colorljm454.
2. Select the printer if prompted, and then click Software and Drivers.
3. The operating system is auto-detected. To select a different operating system,
click Change.
4. Select Firmware, and click the Download button.
To learn more about the printer, go to
www.hp.com/support/colorljM454FAQ
to create an HP ePrint account and complete
or scan the QR code.
Touchscreen control panels
1. From the Home screen on the printer control panel, swipe the tab at the
top of the screen downward to open the Dashboard, and then touch the
HP ePrint icon.
Open the following menus:
• ePrint
• Settings
• Enable Web Services
2. Read the terms of use agreement and touch Yes. The printer enables
Web Services, and then prints an information page. The information
page contains a printer code necessary to register the HP printer at HP
Connected.
3. Go to www.hpconnected.com
the setup process.
Control panel help (touchscreen models only)
To access help topics, touch the Help
Additional support resources
For HP's all-inclusive help for the printer, go to:
• Solve problems
• Find advanced configuration instructions
• Download software updates
• Join support forums
• Find warranty and regulatory information
• Access mobile printing resources
3
to create an HP ePrint account and complete
button on the printer control panel.
www.hp.com/support/colorljm454