EMKO ESM-3722 Serie Manual De Instrucciones página 7

4.Front Panel Definition and Accessing to the Menus
1
2
BUTTON DEFINITIONS
1. Increment Button :
** In main operation screen, press this button to change display temperature and humidity sensor
value.
** It is used to increase the value in the Temperature and Humidity Set screens and Programming mode.
2. Decrement, Silencing Buzzer Button :
** It is used to decrease the value in the Set screen and Programming mode.
** It is used to silence the buzzer.
3. Manual Start of Egg Tray Rotator Operation Button:
** In the main operation screen, if this button pressed engine starts.
engine start will be passive and engine stops.
4. Set Button:
** In the main operation screen; if this button pressed for the first time, Temperature set value will be
displayed. Value can be changed using increment and decrement buttons. When Set button is pressed
again, value is saved and Humidty set value will be displayed next. Value can be changed using
increment and decrement buttons. When Set button pressed again, value is saved and returns back to
main operating screen.
** To access the programming screen; in the main operation screen, press and hold this button for 5
seconds.
** It is used to save value in the Set screens (Temperature or Humidity) and programming screen.
LED DEFINITIONS
5.Alarm led :
** It is active when alarm statuses.
6. Heating Output Led :
** This led indicates that heating output is active.
7.Celcius led :
** Indicates that device is in C mode.
8.Fahrenheit led :
** Indicates that device is in F mode.
9. Egg Tray Rotator Output
** This led indicates that
10. Humidificating Output Led :
** This led indicates that
11.Precent Sign ledi :
** Indicates that device is in Humidity Set screen.
12.Program led :
** Indicates that device is in programming mode .
5 6
9 10
o
o
Led :
Egg Tray Rotator Output
Humidity output is active.
7 8
ü
11 12
When the button is released the
is active.
3
4
7