EMKO ESM-3722 Serie Manual De Instrucciones página 8

5. Changing and Saving Temperature and Humidity Set Value
Main Operating Screen
When SET button pressed ''S'' led will
be active and temperature set value will
be displayed.
Temperature Set Value Screen
When SET button pressed
temperature set value can be saved.
Humidity Set Value Screen
5.1 Changing and Saving Humidity Set Value
Humidity set value can be
changed with increment and
decrement buttons.
Temperature set value parameter ( Default =37.7
Temperature set value, can be programmed between minimum temperature set value
maximum temperature set value
Humidity set value parameter (Default = 60%)
Humidity set value, can be programmed between minimum Humidity set value
temperature set value
i If no operation is performed in Humidity set value changing mode and temperature set value
changing mode for 20 seconds, device turns to main operation screen automatically.
5.1 Programming Mode Parameter List
Temperature Unit Selection Parameter ( Default = 0 )
Decimal Seperator Enabling Parameter
Note : When value of
, , ,
should be changed accordingly.
ESM-3722
ü
ESM-3722
ü
ESM-3722
ü
.
.
°C selected.
°F selected.
None.
Only Temperature parameters with decimal seperator.
Only Humidity parameters with decimal seperator.
Only Temperature and Humidity parameters with decimal seperator.
or parameters are changed , the values of
, , , ,
Temperature Set Value Screen
Temperature set value can
be changed with increment
and decrement buttons.
Humidity Set Value Screen
Goes Humidity SET
value screen.
Humidity Set Value Screen
When SET button pressed
set value can be saved.
main operation screen.
°C )
( Default = 0 )
, , , ,
ESM-3722
ü
ESM-3722
ü
ESM-3722
ü
Humidity
Goes back to
and
and maximum
, , ,
, and parameters
,
8