Step 2 Front Wheel Assembly; Step 3 Rear Wheel Assembly; Step 4 Front And Center Canopy Assembly; Step 5 Rear Canopy Assembly - Foundations 4130079 Manual Del Usuario

STEP 2 Front Wheel Assembly

Assemble Front Wheel Assembly to
Stroller Frame Assembly.
Align Collar of Front Wheel
Assembly (C) with mounting shaft of
Stroller Frame Assembly (A). Push up
on collar until the Front Wheel
Assembly (C) locks into place with a
click.
See Figure 3.
Note: For possible disassembly there
is a release tab on the bottom inside of
the Front Wheel Assembly collar.
For wheel directional locking option see
the Stroller Operation section.

STEP 3 Rear Wheel Assembly

Assemble Rear Wheel and Brake
Assembly to Stroller Frame Assembly.
Align both collars of Rear Wheel and
Brake Assembly (C) with
mounting shafts of Stroller Frame
Assembly (A). Push up until the Rear
Wheel and Brake Assembly (C) collar
locks into place with a click. The spring
button should fully protrude through
hole in Rear Wheel and Brake
Assembly collar (C)
See Figure 4.
Note: For possible disassembly of rear
Wheel and Brake Assembly, fully
depress spring button to release
assembly.
For wheel brake option see the Stroller
Operation section.
Figure 3
AB20076_G5A
Figure 4
6

STEP 4 Front and Center Canopy Assembly

Assemble Front and Center Canopy
Assembly to stroller.
Align spring tab (2) of Canopy
Assembly (E) through opening in the
cloth armrest (1) and into canopy
retainer (3). Assembly locks into place
with a click.
Repeat for both sides.
To remove Canopy Assembly depress
spring tab until it releases from the
canopy retainer.
If the tab does not release easily you
may use a straight screwdriver or equal
tool to depress the spring tab.
See Figure 5.
Note:
For Front and Center Canopy operation
see the Stroller Operation section.
Assemble Rear Canopy Assembly to
stroller.
A
Align Spring tab (1) of Rear Canopy
Assembly (D) into canopy retainer (2).
Assembly locks into place with a click.
Secure hook and loop straps (3) around
the canopy bow.
See Figure 6.
Wrap the lower portion of the Canopy
B
(5) around the outside of the handle
frame and press the hook and loop tabs
together. Wrap the upper portion of the
Canopy (6) around the inside of the
handle frame and Fold Lock Release
and press the hook and loop tabs
together.
To remove Canopy unwrap hook and
loop fasteners, depress the spring tab
and pull out on the Canopy Assembly.
See Figure 7.
Note: For Rear Canopy operation see
the Stroller Operation section.

STEP 5 Rear Canopy Assembly

7
Figure 5
Figure 6
6
5
AB20076_G11A
Figure 7