Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Use of the item
⚫
Place the heater on flat stable surface
⚫
Plug into any 220-240V, 50Hz, AC source, then turn on the switch at side, you will hear the sound of "Di"
⚫
Turn on the heater by press the power "
control or remote control to set power, temperature and time.
⚫
If the appliance is not used for a long time--switch it off with power switch and plug the item out
⚫
Attention! Do not cover the product! Convector should not be place under shower or in swimming pool
TOUCH CONTROL AND REMOTE CONTROL OPERATION
Operation for Touch Control
Insert the plug in a suitable power socket.
The touch screen buttons located on the product correspond to the remote control functions:
display
6.
7.
temperature
8.
mode
9.
timer
10. power
Power
When the product is on, press "power", . the upper part of the display shows temperature.
The heater is working at low power heating conditions.
Mode
Press "mode" to regulate low
G(2)
", the LED will display room temperature, then please use touch
, or high temperature power.
Publicidad
Tabla de contenido
