Tools And Materials; Before You Begin - KALLISTA P72000 Guia De Instalacion

Thank You For Choosing Kallista
We appreciate your commitment to Kallista quality. Please take a few
minutes to review this manual before you start installation. If you
encounter any installation or performance problems, please don't
hesitate to contact us. Our phone numbers and website are listed on
the back cover. Thanks again for choosing Kallista.

Tools and Materials

Tape
Measure
Square
Level
Drill

Before You Begin

CAUTION: Risk of product damage. Do not overtighten the cap
nuts. Overtightening may damage the product.
Observe all local plumbing codes.
Prior to installation, unpack the new lavatory and pedestal and
inspect them for damage.
Return the lavatory and pedestal to the protective cartons until
you are ready to install.
These instructions are for installing the lavatory to wood frame
construction. For other installations, provide suitable bracing and
fastening devices of sufficient size and strength.
The walls and floor must be square, plumb, and level.
Lavatory dimensions are nominal and conform to tolerances in
ASME A112.19.9 standards for non-vitreous ceramic plumbing
fixtures.
Kallista reserves the right to make revisions in the design of
products, as specified in the Price Book.
Your pedestal lavatory may not look exactly like the one pictured.
1008428-2-A
Adjustable
Safety
Wrench
Glasses
Pipe Socket Wrench
Wrench With Sockets
2
Pliers
Pencil
Kallista