Kalorik FE 40764 Manual De Instrucciones página 8

Fax +1 305 430 9692
Put the auger into the filter sieve, and make sure that it is placed
•
on the shaft of the motor unit (Fig. 5).
Put the lid onto the strainer housing. Make the triangle mark of
•
the cover coincide with the triangle mark of the strainer housing
(Fig. 6) and turn the cover clockwise all the way to the stop (Fig.
7) to lock it in place.
Important! If the cover and the strainer housing have not been
assembled correctly, the juice extractor cannot be switched on – the
function is prohibited by a safety switch!
Put the transparent juice container under the juice spout and the
•
black opaque pulp container under the pulp spout.
Switch the appliance on – switch in position „ON".
•
Copies of the I/B. Please reproduce them without any
changes except under
International USA. The pages must be reproduced and folded
in order to obtain a booklet A5 (+/- 148.5 mm width x 210 mm
height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don't change
the page numbering. Keep the language integrity.
Fig. 6
8
Assembly page 8/40
special instruction from Team
Fig. 5
Fig. 7
FE 40764 - 120501