installation
1
Adjusting the levelers
Turn the levelers on the bottom of the vanity until the
vanity is sitting even on the ground.
A
note: It is very important that your unit
is level in order for your doors to function
properly. After moving your unit to its final
location, you may need to adjust the floor
levelers.
2
Securing the vanity to a wall
With the help of another adult, place the vanity (A)
against the wall in desired permanent location. Be sure
the location is accessible to water supply and drain
lines before mounting.
Drill a hole through the vanity mounting rail as shown.
Secure the vanity (A) to a wall stud with at least one
screw.
A toggle bolt (not included) may also be used to attach
directly to drywall.
If possible, secure the vanity (A) to two wall studs for
increased stability.
WarninG: The vanity needs to be
mounted to the wall to prevent accidental
tipping.
5
Please contact 1-800-986-3460 for further assistance.
HOMEDEPOT.COM/HOMEDECORATORS